EZAccessory 2 Billet Wheel Adapters 6x135 to 5x135 Fits Ford 6 Lug F150 Hub with Lip to Hub Centric Fit Wheels From 5 Lug F150 97-03

Product Information:These two piece conversion type wheel adapters are used to convert 6 lug 135mm bolt pattern hub to fit wheels of 5 lug 135mm bolt pattern. Adapters are built with 87mm hub centric lip. If your wheels have 87mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels.Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations.Snug Fit on the Following Vehicles/Axles with 87mm Hub:Ford: Expedition (05-on), F150 (05-on)Lincoln: Mark (06-08), Navigator (03-on)Hub Centric Fit for Factory Wheels (or 87mm Bore wheels) from These Vehicles: Ford: 5 lug F150, 5 lug ExpeditionLincoln: 5 lug Navigator**Even if your 135mm bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings.Adapter Specification:Vehicle Bolt Pattern: 6x135mm Wheel Bolt Pattern: 5x135mm Studs Thread Size: 14x2.0 Hub Bore Size: 87mmHub Centric Lip: 87mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbsTechnical Notes:If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.

• 【Purpose】Convert from 6 lug vehicle to 5 lug wheel, meaning putting 5 lug wheels on 6 lug vehicle
• 【Fit Vehicle】Fit vehicles of 6x135mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels.
• 【Convert Wheel】Convert to wheel must be 5x135mm bolt pattern. Sold by pair (2 adapters)
• 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs.
• 【Attention】14x2 studs; 2" (50mm) thickness; 87.2mm center bore; Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vehicle studs.
• 【Mounting Lug Nuts】Open end mounting lug nuts 14x1.5 included to match vehicle studs